Farm Equipment - hard PS 8010

Print Page | Close Window

hard PS 8010

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47596
Printed Date: 28 Aug 2025 at 10:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: hard PS 8010

Posted By: jjpetrich
Subject: hard PS 8010
Date Posted: 19 Mar 2012 at 10:15pm

Compared to our 8050 the 8010 power shift is harder to move from each gear to the next. Just wondering if its a fluid problem since i dont think the cable is wore out. Any advise would help.

-------------
On the farm wd,wd45,180,200,7020,8010,8050,f,L2,2 b engines

Replies:

Posted By: Russ-neia
Date Posted: 19 Mar 2012 at 10:25pm

It would either be the cable or someone has been inside the shift control behind the batteries and rounded the saw teeth on the 8050 to make the action easier.

-------------
The innovators offer what others will imitate.

Posted By: DrAllis
Date Posted: 20 Mar 2012 at 6:30am

Replace the cable.

Posted By: MACK
Date Posted: 20 Mar 2012 at 7:57am

Through the years of PS there were at least 4 different spring and linkage arangements for the detent. One had 3 different holes for spring for how much detent pressure you wanted. You could have this one set for most detent pressure. MACK