Farm Equipment - D14 ringgear

Print Page | Close Window

D14 ringgear

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47058
Printed Date: 24 Aug 2025 at 3:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 ringgear

Posted By: jaybmiller
Subject: D14 ringgear
Date Posted: 11 Mar 2012 at 9:35am

Hay guys...who sells 93 tooth ring gears (A-C # 227556) ?

Mine's chewed to 'ratdodo' , also should have a pilot bushing ( A-C # 228188).

And then I'll need a trained octopus to put the poor D14 back together...yeesh, garage is FULL of things, here, there, everywhere....

thanks

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Replies:

Posted By: norm[ind]
Date Posted: 11 Mar 2012 at 9:56am

we have them in stock call 1-574-342-4545 just shipped one out more coming

Posted By: jaybmiller
Date Posted: 11 Mar 2012 at 6:44pm

bad news..update... I should also replace the lightly chewed up starter gear AND I think the rear crankshaft seal is 'weepy'.either it or the tranny input shaft seal.

Also the pilot bearing was pushed in AND the flywheel surface needs to be 'decked.

Good news is I'm getting a free Bridgeport milling machine this week,hopefully I and sell it to pay for the 'odd ball' ring gear.

Dum question...could I replace the 93 toother with a 116 if I replace the starter gear as well? Would like to save a few bucks here, D-14 is a spare...

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: norm[ind]
Date Posted: 11 Mar 2012 at 7:32pm

93 T00TH IS FOR A 6VOLT UNIT 116 IS FOR A 12V UNIT THINKING THE I.D. IS

DIFFERENT ALSO JUST BEEN THRU THIS?????? MY 2 CENTS