Farm Equipment - Needed D-17 series 4 rearend housing

Print Page | Close Window

Needed D-17 series 4 rearend housing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=45641
Printed Date: 05 Sep 2025 at 3:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Needed D-17 series 4 rearend housing

Posted By: WI D-21
Subject: Needed D-17 series 4 rearend housing
Date Posted: 15 Feb 2012 at 7:57pm

The inside of our d-17 rearend housing has a alot of wear where a shaft passes through it. It looks like the bushing got stuck to the shaft and wore the housing. The local machine shop said they could not do anything with it.

Thanks ahead of time.

Replies:

Posted By: Eldon (WA)
Date Posted: 15 Feb 2012 at 8:34pm

I have one from a 170, but it is still full of good gears $$$$$$ Also have one from a 185 that is full of bad gears $

-------------
ALLIS EXPRESS!
This year:

Posted By: Travis(NE)
Date Posted: 15 Feb 2012 at 10:43pm

Which housing and shaft? The only shafts with bushings I can think of is the lift arm shaft or possibly the front of the rear PTO shaft?

Posted By: Bill Deppe/AC Salvag
Date Posted: 15 Feb 2012 at 11:16pm

Would have one, just need to disassemble Ia 563 652-2949

Posted By: WI D-21
Date Posted: 16 Feb 2012 at 7:20am

It's the front of the PTO shaft.