Farm Equipment - need help ca

Print Page | Close Window

need help ca

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=44490
Printed Date: 26 Aug 2025 at 11:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: need help ca

Posted By: acwdwcman
Subject: need help ca
Date Posted: 26 Jan 2012 at 12:50pm

how do i take of the barrings on the front end of a narrow front ca?

-------------
wd with a freeman model 90 trip loader, wd45, 38 unstylled wc, b 10 garden tractor and 2-14 ac trip plow. grandpa has a 56 wd45. wd. allis chalmers snap coupler blade and 3 bottom snap coupler plow

Replies:

Posted By: JeffMOnt
Date Posted: 26 Jan 2012 at 3:16pm

From the manual:

To disassemble pedestal and front steering gear, support tractor under torque tube and remove front wheels. Remove cap screws retaining pedestal to front support and remove pedestal. Remove cap screw, washer and shims from top of vertical spindle shaft and pull pinion gear off shaft. Withdraw shaft, bearing cone and oil seal from bottom of housing.

Posted By: GregLawlerMinn
Date Posted: 26 Jan 2012 at 3:19pm

If you mean the wheel bearings: Pull off the wheels and hubs. the bearings are ball bearings. The inside of the bearings are a tight fit to the spindles and the outside of the bearings run in a race that is pressed into the hub. You may need a puller or a chisel and BFH to take the bearings off the spindles; a chisel and hammer works well to remove the races pressed into the hubs.

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Josh Day
Date Posted: 26 Jan 2012 at 5:25pm

Did you get a CA ?