Farm Equipment - Unstyled WF manifold gasket needed...

Print Page | Close Window

Unstyled WF manifold gasket needed...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42691
Printed Date: 22 Sep 2025 at 5:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Unstyled WF manifold gasket needed...

Posted By: Chad(WI)
Subject: Unstyled WF manifold gasket needed...
Date Posted: 25 Dec 2011 at 10:01am

Anyone know of a source for the gasket that goes between the exhaust cover stamped "G" and a sideshooter manifold itself, or has anyone had luck making it out of a heavier gasket material? Any thoughts or info appreciated.

Replies:

Posted By: JoeM(GA)
Date Posted: 25 Dec 2011 at 10:08am

Chad, there is no gasket there. I had the one on my WC just barely decked so it would be very flat and then cut one out of some very thin muffler gasket material

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Chad(WI)
Date Posted: 25 Dec 2011 at 4:17pm

Thanks Joe....good reason why I didn't see one listed in the parts book.

Posted By: hamman01
Date Posted: 28 Dec 2011 at 7:11pm

I have seen guys use sheet copper to make gaskets for exhaust out of. A couple layers of that in between the cover or 45 deg. stack should do it.