Carb Rebuild Kit WD45
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=40084
Printed Date: 05 Nov 2025 at 10:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Carb Rebuild Kit WD45
Posted By: Mochaman
Subject: Carb Rebuild Kit WD45
Date Posted: 05 Nov 2011 at 3:42pm
Hey, I'm curious if anyone has a preference to which rebuild kit for the tsx871 is best. I rebuilt it last around 20yrs ago. I rebuilt the neighbors carb off his "C" last year and a $42.00 off the shelf rebuild kit led to a series of phone calls that led me to the manufacturer who was a single older gentleman located in Missouri. He didn't really care about my problems, so....The rebuild kit was mostly crap. The gaskets had to be remade by myself and the throttle arm was clocked 180 degrees off and it was pressed on. Two of the rubber(viton) shaft seals were the wrong size and one was missing. I'm willing to spend $50 bucks on the rebuild kit but it needs to be complete and correct....anyone like a specific kit? I want a complete kit if one is even offered anymore.
Thanks.
|
Replies:
Posted By: norm[ind]
Date Posted: 05 Nov 2011 at 6:36pm
|
we carry the kit for a wd45 with jets and shaft--1-800-254-3116 -visa-discover-master cards
|
Posted By: Skyhighballoon(MO)
Date Posted: 05 Nov 2011 at 10:26pm
You want to contact Steve Barbato @ B&B Custom Circuits. Steve goes by "Steve in NJ" on the forum. Send him a Private Message. He'll give you a complete carb kit plus you can get any other parts beyond a standard kit for your 871. Steve also does full rebuilds if you send him your carb. He did my 871 and did a fantastic job. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Mochaman
Date Posted: 06 Nov 2011 at 9:23am
Thanks for the responses. I appreciate it.
|
|