7045 turn signal?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=39260
Printed Date: 24 Sep 2024 at 2:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7045 turn signal?
Posted By: XT in pa
Subject: 7045 turn signal?
Date Posted: 20 Oct 2011 at 9:59am
|
With the 4-way flashers on and the turn switch on both ,4-ways flash,but when you turn the switch for the turn signal (right or left) they will not blink they just stay on. I checked the flasher but it works on the 4-ways and there is no bulb burnt out.
thanks Shawn ------------- 190XT,D17and 7045 |
Replies:
Posted By: Ben (MI)
Date Posted: 20 Oct 2011 at 10:26am
| If I remember, I had the same problem on my 7000 and replacing the flasher unit did the trick. Not too expensive to try it anyway. Good luck. |
Posted By: niel ev
Date Posted: 20 Oct 2011 at 1:05pm
| Shawn the switch should be a square box right ? if so they may have replaced it with a later switch and if memory is working tehy had to cut one of the wires to got it to work but I don't remember which one I'll see if i can find out Niel |
Posted By: XT in pa
Date Posted: 20 Oct 2011 at 2:13pm
|
Niel when you talk switchwhat one do you mean i just changed the main light switch cause it was shorted out,anyway it had a circut braker on it the one for the turn signal i think is a big round switch the part under dash hope this helps .
Shawn ------------- 190XT,D17and 7045 |
Posted By: niel ev
Date Posted: 20 Oct 2011 at 4:02pm
| Shawn the main light switch should be square and in the new box there should have been an paper telling you what was changed or what wire needs to be cut had the same thing happen to us about 4 years ago Niel |
Posted By: niel ev
Date Posted: 20 Oct 2011 at 4:14pm
| Shawn I forgot to ask if your tractor wasunder serial number 3053 I was working on a later tractor when we had that problem and also it was the turn switch not the main light switch Niel |
Posted By: SHAMELESS
Date Posted: 21 Oct 2011 at 12:57am
| i replaced one on my 7010, and there is one wire you leave disconnected, but can't remember which one, it tells you in the instructions....also may seem dumb, but check your bulbs too. even tho they work in one position, dunno why, but i replaced one bulb and it worked!! *scratching head!!! |
Posted By: XT in pa
Date Posted: 21 Oct 2011 at 5:33am
sn 1115 ------------- 190XT,D17and 7045 |
niel ev wrote:Posted By: Eric[IL]
Date Posted: 21 Oct 2011 at 5:44am
| I just changed this in-dash electrical switch unit in my black 7060. Same problems you are mentioning. It took care of the problems. Yes, there is a installment paper in the new part box. Just follow directions. |
Posted By: XT in pa
Date Posted: 21 Oct 2011 at 6:09am
|
Eric so you say its the turn signal switch.
Shawn ------------- 190XT,D17and 7045 |