48 WD on Ebay
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=38938
Printed Date: 28 Oct 2025 at 4:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 48 WD on Ebay
Posted By: podunkpuller
Subject: 48 WD on Ebay
Date Posted: 14 Oct 2011 at 4:28pm
|
http://cgi.ebay.com/ebaymotors/1948-ALLIS-CHALMERS-TRACTOR-/270830368983?pt=Other_Vehicles_Everything_Else&hash=item3f0ebf78d7 - http://cgi.ebay.com/ebaymotors/1948-ALLIS-CHALMERS-TRACTOR-/270830368983?pt=Other_Vehicles_Everything_Else&hash=item3f0ebf78d7 ------------- 310, 2 B's, C, 2 WC's, 2 WD's, WD-45,D-14, D-17 gas, D-17 d IV, 190 |
Replies:
Posted By: podunkpuller
Date Posted: 14 Oct 2011 at 4:32pm
|
I suppose you shoot for the sky, but 8k starting and 10k buy it now !!!! I think it might be one of those rare ones that is 200hp factory and it runs on snow owl eggs mixed with baby seal oil. For about $2500 it would sell quick or $4000 if you could wait. ------------- 310, 2 B's, C, 2 WC's, 2 WD's, WD-45,D-14, D-17 gas, D-17 d IV, 190 |
Posted By: kev/ont
Date Posted: 14 Oct 2011 at 6:28pm
It cost me almost $9000 dollars to do this one up. (family tractor) In reality thats what it should be worth. In the real world though not going to happen
|
Posted By: John (C-IL)
Date Posted: 14 Oct 2011 at 7:10pm
| For that kind of money I would hope for a better description than "fully restored". |
Posted By: TREVMAN
Date Posted: 14 Oct 2011 at 7:45pm
| For that much there cant be a bolt unturned, engine, hydraulics, transmission, finals, bearings, steering box, bushings, everything has to be new. Sheet metal would have to be new or heavily worked, no bondo. Paint would have to the right shade, and it doesnt look like it, and would have to be about 10 coats wet sanded between and then cleared. Tires would have to be new high enders. All new ignition switched to electronic. I highly doubt most of the above has been done. I dont expect to have much more than a $1000 into the resto of mine when done...this guys dreamin, Trev. |
Posted By: CTuckerNWIL
Date Posted: 14 Oct 2011 at 7:52pm
|
Yea, and it don't even have a belt pulley.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |