AC 616
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=3672
Printed Date: 15 Jan 2025 at 1:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 616
Posted By: dgjj
Subject: AC 616
Date Posted: 13 Nov 2009 at 12:23pm
| I recently aquired a AC 616 has a 16.5 Onan ( CCKA-MS/20260 ser. 1271350214), 60" deck and 72" rear blade , "0" 3pt. hicth, wheel weights, hr meter 1233.0 Can anyone tell how I can find out when it was actually made, the serial number on the tractor is incomplete as there are hydraulic hose's over & through the tag. All I can make out is 18614 ? 51. This unit has a half moon cut out in the hood on both sides, the cut out areas do have what appears to be factory trim, it leads me to believe it would have had a dual exhaust stack. I have been trying to find any information I can on this 616. Thank you DGJJ |
Replies:
Posted By: Embellem
Date Posted: 13 Nov 2009 at 1:03pm
|
Try the Simple tractors web site at http://www.simpletractors.com/ Simplicity built AC L&G tractors. That site is the best place to start. |
Posted By: accoll
Date Posted: 19 Nov 2009 at 3:04pm
| My 616 was built in 1972. Was repowered with a 20 HP Kohler engine. Ken |
Posted By: Nate (OH)
Date Posted: 20 Nov 2009 at 1:07pm
if the hood is cut, it certainly is not from the factory. the previous owner may have cut it to fab a dual exhaust because the oem are so expensive.
|
dgjj wrote: