Farm Equipment - WD seat shock

Print Page | Close Window

WD seat shock

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=35701
Printed Date: 28 Aug 2025 at 4:43am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD seat shock

Posted By: Terry GA
Subject: WD seat shock
Date Posted: 18 Aug 2011 at 10:40am

Does anyone know if there is a cross over shock and spring for a WD seat?Like a Monroe etc made for a car or truck but will fit a WD.If so part number if possible,thanks,

Terry.

-------------
I couldn't repair your brakes, so I made your horn louder.

Replies:

Posted By: R Aiken
Date Posted: 18 Aug 2011 at 10:53am

I replaced the shock on a WD with one off a 1951 Ford car. It worked good and fit the spring. I dont know what number it was, as that was 50 years ago.

Posted By: WD in kansas
Date Posted: 18 Aug 2011 at 12:06pm

I went through this a few months ago. Even with a very good NAPA man (oldtimer) we could not find any that were the correct length and that also had the correct "eye" size to accept the rubber bushings. A couple of the vendors on this site have new replacements, but they are a bit pricey. I found a used one from a member here, and bought new bushings for it.

-------------
1950 WD, Duetz Allis 613

Posted By: George R. (MN)
Date Posted: 18 Aug 2011 at 12:37pm

Give Tony Carbaugh a call at 877-602-3994. He will be able to help you out. Good folks to do business with. Tony is also a sponsor of this site. You can check out his catalog at his website shown on the parts pages.

-------------
My tractor is not leaking oil, it's just marking it's territory!

Posted By: Tony.Or
Date Posted: 18 Aug 2011 at 4:39pm

Hi guys ! We went all through this years ago , got set up to make the schocks work, welded thick washers to them, were ready go, then supplier made them ready to bolt on. Give us a shout. or email. 1-877-602-3994 mailto:tony@tonystractor.com - tony@tonystractor.com

Thanks Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: NCAllisnut
Date Posted: 18 Aug 2011 at 8:48pm

I used these parts a few years ago. Don't let them cross the monroe # to another brand, the Monroe 5752 is the same dimensions.

Monroe 5752 - Advance Auto - $25

Seat Bushings - HELP! 31001 - $7

Things may have changed, I bought these part numbers in 2008 or 2009.

Adam