Farm Equipment - D14 oil filter housing?

Print Page | Close Window

D14 oil filter housing?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=35566
Printed Date: 01 Nov 2025 at 11:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 oil filter housing?

Posted By: baverwolf
Subject: D14 oil filter housing?
Date Posted: 15 Aug 2011 at 8:14pm

Hello everyone. I was working on putting a new gasket in where the oil filter housing bolts to the block on my D14. My housing had been overtightend at some time and was bent and distorted some. I decided I would put it in the vise and carefully bend the ears a little and straighten it some and then file any high spots flat again. Well.... my careful bending didn't go so well and I broke an ear off. I know I've seen what looks like the same housing on a WD45 and was curious if it is the same or if it's different??

Thanks!

Ben

Replies:

Posted By: baverwolf
Date Posted: 16 Aug 2011 at 5:38pm

Anyone know if they'll interchange??

Posted By: RichinWis
Date Posted: 16 Aug 2011 at 6:49pm

yes, same thing as the earlyer ones. D15 on up is different, they are full flow

Posted By: baverwolf
Date Posted: 16 Aug 2011 at 6:59pm

Thanks! I appreciate it!

Ben