Farm Equipment - D-14 seal issue

Print Page | Close Window

D-14 seal issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33409
Printed Date: 21 Aug 2025 at 2:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-14 seal issue

Posted By: Me and My ACs
Subject: D-14 seal issue
Date Posted: 06 Jul 2011 at 10:37am

Hello I am new here and have a question. My d14 is losing ALOT of hydraulic fluid into the transmission and power director compartments. I checked the ram and hydraulic lines under the back. So i pulled the inspection panel off for the power director and started the tractor up and she starts pumping hydraulic fluid throgh a hole that is between the main and pto shafts. i cannot tell if there is a bearing that needs a new seal in there or if it is just suppost to have a plug. thank you very much for any help.

Replies:

Posted By: skipwelte
Date Posted: 06 Jul 2011 at 12:13pm

Sounds like the plug came out of the end of the trans countershaft. Its a steel soft plug, above the pto shaft.