help with wheelie bars
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=33029
Printed Date: 26 Jun 2024 at 2:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: help with wheelie bars
Posted By: JM
Subject: help with wheelie bars
Date Posted: 28 Jun 2011 at 9:41pm
|
I would like make up a set of wheelie barts for my wd45 that could easily be taken off and on. Does anybody have a good set up for this ? How about some Pics? Thanks for any ideas, JM |
Replies:
Posted By: Dans 7080
Date Posted: 28 Jun 2011 at 10:08pm
| I built a set 6 or 8 years ago for a pull that got canceled. I bought a set of junk fenders and used the mounting plates, the only bad thing is I cant use both the wheelie bars and the fenders at the same time. I welded tube steel (roughly 2"x2") to it with a smaller tube inside, that will adjust for different height tires. I may be able to get some pics if I remember where I have them at. |
Posted By: Fields
Date Posted: 29 Jun 2011 at 8:46am
Where are you located ? I had Phile Brown from farley iowa buid mine. bolts to where the lift arms aratch to the rear end.
|
Posted By: Spanky
Date Posted: 22 Oct 2011 at 11:56am
| It seems that I am having some difficulty finding a set of Allis Chalmers wheelie bars fo a 1939 WC on steel wheels. Can you direct me to the individual that helped get you set up? Any help you can give to get me into the bars would be appreciated. Thanks, Jeff |
Posted By: BennyLumpkin
Date Posted: 22 Oct 2011 at 4:50pm
I need to bring them back a bit farther but I'll do that this winter. This is on my 45 WC   ------------- Central PA Allis Express 1934 WC254 1945 WF 1945 WC135755 1951 WD68085 1953 WD45-150217 1957 WD45D-230744D B110 |
Posted By: BennyLumpkin
Date Posted: 22 Oct 2011 at 4:51pm
|
But I have tested them and they do work lol
------------- Central PA Allis Express 1934 WC254 1945 WF 1945 WC135755 1951 WD68085 1953 WD45-150217 1957 WD45D-230744D B110 |
Posted By: Spanky
Date Posted: 22 Oct 2011 at 9:58pm
| By any chance are you the guy who makes these? Will the wheelie bars sustain the raising of the tractor with a jack being used under the sand pad of the wheelie bar? Is that metal stock solid, or tubular? If you make these, can you do it in a telescoping version? Thanks for getting back to me so quick. Jeff |
Posted By: d17brown
Date Posted: 23 Oct 2011 at 6:17pm
| i can make the wheelie bars, the set in the pic was aset i made for feilds,they are tubular and telescoping and they wil raise the tractor with a jack |
Posted By: mlpankey
Date Posted: 23 Oct 2011 at 7:00pm
i will sell this hitch wheelie bar set up for $500 obo . Need to check rules some rules do not like these hitches.
 also have a diesel 45 rear end for 500 1st and 2 gear is good . been pulling 3rd with it and its jumping out last time pulled. ------------- people if they don't already know it you can't tell them. quote yogi berra |