Farm Equipment - "C" carb adjustment

Print Page | Close Window

"C" carb adjustment

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32812
Printed Date: 24 Jun 2024 at 6:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: "C" carb adjustment

Posted By: Larry(OH)
Subject: "C" carb adjustment
Date Posted: 24 Jun 2011 at 6:08pm

Trying to get the C running after the water issue (fuel). still will not run. it will hit on a couple, then die. I took air filter off and tried a shot of gas right in and same result. I did take carb off, apart,cleaned,reassembled and same thing. Any ideas. I did not move air and fuel screws, but was thinking about starting over with those setting and seeing what happens

Thanks, LH

-------------
'40 WC puller,'50 WD puller,'50 M puller '65 770 Ollie

*ALLIS EXPRESS contact*

I can explain it to you, BUT I cannot understand it for you!!

Replies:

Posted By: Tedin NE-OH
Date Posted: 24 Jun 2011 at 6:19pm

Check for fowled plugs, and spark at all plugs.

Posted By: CTuckerNWIL
Date Posted: 24 Jun 2011 at 9:38pm

Could very well be a plug problem. Poor fuel can put a glaze on a plug in no time and they will not fire through it.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: Ohio Orange
Date Posted: 24 Jun 2011 at 10:07pm

Poor Spark ! If it wont fire with what you did , it's in the ignition .