Print Page | Close Window

180, 3 point lift creeps up?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=32322
Printed Date: 19 Oct 2025 at 3:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 180, 3 point lift creeps up?
Posted By: nsula_country
Subject: 180, 3 point lift creeps up?
Date Posted: 15 Jun 2011 at 11:13pm

I have noticed when mowing the 3 point lift creeps up. The cylinders leak a little out the vents when parked, but I have kits for them. If they were an issue they would creep down. Could it be my valve is not centering properly? Can the centering detent be adjusted. Is the valve worn?

Thanks,

CT




Replies:
Posted By: MACK
Date Posted: 16 Jun 2011 at 6:28am
Traction booster linkage needs adjusted or linkage at valve is sticking.  MACK


Posted By: nsula_country
Date Posted: 16 Jun 2011 at 8:19am
All the linkages from the "torque" link where the base of the lift arms are to the traction control levers themselves are gone. those two short levers are decoration. I'd like to repair that some day. I'd like the draft control to work again.

The handle seems stiff in places like the detent or linkage is sticking. I'll check into that. I'm thinking valve.

CT



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net