Farm Equipment - CA locked in 4th...

Print Page | Close Window

CA locked in 4th...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31812
Printed Date: 25 Sep 2025 at 4:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: CA locked in 4th...

Posted By: Wes (VA)
Subject: CA locked in 4th...
Date Posted: 05 Jun 2011 at 11:29pm

A friend of mine has a CA that got stuck in 4th gear, and then he was able to pull the shift lever in to neutral while still stuck in 4th. Has only done this once.. he was able to get it out of gear without taking anything apart. concerned, he pulled the cover off and we weren't able to see anything majorly wrong.. some wear on the forks, but I dont believe it to be major. The ball of the shifter had been built up, but wasn't completely round. I'm sure its been discussed before, but what is the size of the ball supposed to measure? May also build up the forks while we're in there. Thanks -Wes

Replies:

Posted By: Coke-in-MN
Date Posted: 05 Jun 2011 at 11:35pm

dont try to build up forks , just build up lever end until it fits into fork. measure the fork and the width of the ball end also.

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: JR Maley
Date Posted: 06 Jun 2011 at 8:19am

Thats what you get for having a 4th gear.

Posted By: WD in kansas
Date Posted: 06 Jun 2011 at 9:39am

My WD has this issue (like all of them seem to). I know the fix is to build up the ball and possibly the end of the shifter. Since I am not a welder or a machinist, I've often wondered if anyone on the forum rebuilds these? It would be ideal if somebody had sort of a "core" program... send me a good one and I send you my worn out one. I need the tractor for mowing pretty often.

-------------
1950 WD, Duetz Allis 613

Posted By: Tedin NE-OH
Date Posted: 06 Jun 2011 at 10:56am

The ball on the end of the shift lever should be 5/8 in diameter.

Posted By: WD in kansas
Date Posted: 08 Jun 2011 at 8:04am

Bump ....... does anyone on the forum rebuild shifters?

-------------
1950 WD, Duetz Allis 613

Posted By: Gary in Texas
Date Posted: 08 Jun 2011 at 9:01am

Try Bill at Sandy Lake Imp.

seems they offered to do the WC for me.