What kind of rivet is this?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=31793
Printed Date: 13 Oct 2025 at 12:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What kind of rivet is this?
Posted By: TomYaz
Subject: What kind of rivet is this?
Date Posted: 05 Jun 2011 at 7:24pm
This style of rivet seems a lot stronger than your typical pop rivet. What is the name of this kind of rivet and they even available anymore?:
  ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: TMiller/NC
Date Posted: 05 Jun 2011 at 7:39pm
| Check McMaster Carr they have them. Countersunk head tubular, same as brake lining rivet ...Tim |
Posted By: DMiller
Date Posted: 05 Jun 2011 at 7:53pm
| Proper term s a cold upset rivet, with that one having a "elevator" head(flat and almost flush) |
Posted By: Toscani NE SD
Date Posted: 05 Jun 2011 at 9:10pm
| i don't know how to spell it properly ,but it's a huck rivet,semi's use them , |
Posted By: LouSWPA
Date Posted: 05 Jun 2011 at 9:12pm
|
Looks like one would need a special tool to set them ------------- I am still confident of this; I will see the goodness of the Lord in the land of the living. Wait for the Lord; be strong and take heart and wait for the Lord. Ps 27 |
Posted By: SHAMELESS
Date Posted: 05 Jun 2011 at 11:48pm
| any rivit...is a pain in the butt rivit!! |
Posted By: Coke-in-MN
Date Posted: 05 Jun 2011 at 11:53pm
|
Yes you need a setting tool for them , either a driver or press. Used a similar one for brake linings and I used similar on circuit boards where multi-layer or 2 sided boards needed contact on both side . ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |