Woods L 59 Mower question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=30104
Printed Date: 16 Nov 2024 at 2:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Woods L 59 Mower question
Posted By: craigreavley
Subject: Woods L 59 Mower question
Date Posted: 02 May 2011 at 10:24am
| I have a woods L 59 belly mower on my C and I need need right and left skid shoes that go on the sides. Mine are worn through with holes. Does anyone have a pair for sale, or know of a source for new ones. |
Replies:
Posted By: GregLawlerMinn
Date Posted: 02 May 2011 at 10:30am
|
Parts are still available thru Woods. I recently purchased new front wheels for my L306 from the local dealer. The operators and parts manuals are available on-line at the Woods Website: http://www.woodsequipment.com/mowers.aspx?id=10305&ekmensel=41a6502d_21_0_10305_7 - http://www.woodsequipment.com/mowers.aspx?id=10305&ekmensel=41a6502d_21_0_10305_7 ------------- What this country needs is more unemployed politicians-and lawyers. Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC |
Posted By: Dakota Dave
Date Posted: 02 May 2011 at 10:37am
|
try the dealer locator on the woods site.
http://www.woodsequipment.com/locator.aspx?id=12537&ekmensel=c57dfa7b_131_0_12537_3 - http://www.woodsequipment.com/locator.aspx?id=12537&ekmensel=c57dfa7b_131_0_12537_3
they still make them and parts are avaliable.
Our local woods dealer has wear parts instock.
the local John Deere dealer also orders parts for me.
|
Posted By: Dick L
Date Posted: 02 May 2011 at 10:41am
| I re shoe mine with an old auto leaf spring hunk. |
Posted By: craigreavley
Date Posted: 02 May 2011 at 10:44am
| That is exactly what I had thought about doing. I have some old broken springs off a 1 ton dump that are the same width, and are close on the curvature. Sandy Lake has them new for 50 bucks each plus shipping. I may try to weld em up, and then if it doesnt work bite the bullet on new ones. |
Posted By: Nathan (SD)
Date Posted: 02 May 2011 at 11:20am
| Use the springs. |
Posted By: Orange Blood
Date Posted: 02 May 2011 at 11:53am
------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
GregLawlerMinn wrote:Posted By: norm[ind]
Date Posted: 02 May 2011 at 7:44pm
|
if mower is properly adjusted the skid shoes should not run on the ground!!!!
woods tells us that also
|
Posted By: CTuckerNWIL
Date Posted: 02 May 2011 at 7:56pm
I guess I need to read the manual. How does that work if you don't have the caster wheels up front. I know they are an option. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: craigreavley
Date Posted: 03 May 2011 at 7:12am
| Norm, I was sort of wondering about that. Mine run on the groung the whole time, If I get em rebuilt I need to adjust the front wheels to get the skids up so they dont wear out that fast. It did take about ten years to wear them out. |
Posted By: CTuckerNWIL
Date Posted: 03 May 2011 at 9:54am
|
If you rebuild them with old leaf springs, you'll probably bet 20 years out of them. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Tedin NE-OH
Date Posted: 03 May 2011 at 10:30am
| Sandy Lake Implement has new ones 1-888-252-0656 |
Posted By: Dick L
Date Posted: 03 May 2011 at 10:36am
| I have over a quarter of a mile of road ditch that I mow. I have the caster wheels adjusted for the flat-er yard. When you are to the bottom of the ditch one side runs on the grass with one caster wheel off the ground. Right or wrong I assumed that this is why they had runners on the outer edge. |
Posted By: Greg_WJP_(WI)
Date Posted: 03 May 2011 at 1:51pm
| I have the same issue as Dick L. When I mow the ditches the skids on my L306 make contact with the ground. On a flat surface/yard they don't touch. |
Posted By: Chris/CT
Date Posted: 16 Jul 2012 at 4:36am
| I have a set of wheels and a set or runners off Woods I believe. Do you have a picture of what you need? If I get some time I will post picture of what I have if interested. |
Posted By: Chris/CT
Date Posted: 16 Jul 2012 at 5:23am
|
Posted By: Ted J
Date Posted: 16 Jul 2012 at 6:28am
|
The caster wheels are supposed to take the whole weight of the mower. The skid plates are for what Dick says, when you are on uneven ground it will keep the mower from running the blades into the ground. You should also have the caster wheels set correctly so that any tree stumps that you might have will travel above the stump. Don't ask me how I know this...
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |