"WD" Spring tooth field cultiator parts wanted....
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=29089
Printed Date: 28 Jun 2024 at 1:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: "WD" Spring tooth field cultiator parts wanted....
Posted By: Chad(WI)
Subject: "WD" Spring tooth field cultiator parts wanted....
Date Posted: 13 Apr 2011 at 6:54pm
| Anyone know parting out one? I tried my agco dealer....seems these days if you're not buying a new skid-steer from them, they don't have the time to look for the old stuff. Anyway, I'm looking for part #320369...they are the "caps" for the end of the tool bar where the truss rods connect to, and I need 2. My scanner is on the fritz...so I don't have a pic from my parts book. I also need 3 "spring teeth", part number 324409. Any help would be appreciated. Chad |
Replies:
Posted By: Matt (Jordan,MN)
Date Posted: 13 Apr 2011 at 6:59pm
| I have the caps send me a PM Matt |
Posted By: Chris/CT
Date Posted: 13 Apr 2011 at 8:33pm
| Chad, Are those spring "teeth" the double ended points? if so, I have 6 total, all new, 2 look heavier than other 4. I also just threw a dbl layer curved tine in my recycle bin for that unit I think. |
Posted By: Chris/CT
Date Posted: 14 Apr 2011 at 7:58am
|
Posted By: Chris/CT
Date Posted: 14 Apr 2011 at 8:00am
| 2 same [design #1], 2 same [design #2],1 original AC? |
Posted By: Don(MO)
Date Posted: 14 Apr 2011 at 9:05am
|
Chris, What do you get for them? I'm needing one like you posted on the right side.
Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Chris/CT
Date Posted: 14 Apr 2011 at 9:52am
| Don, Offered all to Chad, If he does not take them/need the end one you may have it. |
Posted By: Don(MO)
Date Posted: 14 Apr 2011 at 11:38am
Chad I'm SORRY; I didn't mean to step on your deal.
Someday I'll learn to read things two or three times before posting. lol
Chris if he leaves some behind I'd like in on one of them. Don ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Chris/CT wrote:Posted By: Steve(SEMN)
Date Posted: 14 Apr 2011 at 11:41am
| fleet |
Posted By: Steve(SEMN)
Date Posted: 14 Apr 2011 at 11:42am
| Fleet farm carries those points and they are very similar. |
Posted By: Chad(WI)
Date Posted: 14 Apr 2011 at 4:05pm
| Thanks for the pic Chris....I actually need the spring that those points bolt to, as I have 3 that are broke off. The termonolgy I used came right from the field cult. parts book, so sorry for the confusion. Don...I understand the PM now, and no offense taken on anything! I'll try to get a pic here soon. |
Posted By: Chad(WI)
Date Posted: 14 Apr 2011 at 4:36pm
OK....got someone smarter than me to help here! This is the pic of the of the "spring tooth, item 1 " that I need 6 of....
 And this if the pic of the "cap, item 7 " that I need 2 of....
 Thanks in advance for all of the previous comments and help. Chad
|
Posted By: ChuckLuedtkeSEWI
Date Posted: 14 Apr 2011 at 4:46pm
|
Chad, are those similar to the ones that come on a two row WD cultivator? I might have a couple extras here. I will go out and look.
------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: ChuckLuedtkeSEWI
Date Posted: 14 Apr 2011 at 4:53pm
|
Chad, the springs that you are looking for, do they have one or two pieces to them. I have some from a partial set of mounted cultivators, that look just like them, but have two spring pieces that go together to make one spring piece. I will post a picture. I have 5 of them, and they aren't anything like any of the other cultivator parts on my other set of field cultivators, so I have no use for them. I will post a picture of them. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: ChuckLuedtkeSEWI
Date Posted: 14 Apr 2011 at 5:41pm
Chad, here is a pic.
 ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: Chad(WI)
Date Posted: 14 Apr 2011 at 5:50pm
| That's interesting Chuck....they look correct, but do you think they are just doubled up? |
Posted By: Chad(WI)
Date Posted: 14 Apr 2011 at 6:23pm
| OK Chuck...Did some measuring, and mine are 1/2" thick....Don't think yours will work but thanks for checking. |
Posted By: TedBuiskerN.IL.
Date Posted: 14 Apr 2011 at 9:56pm
|
I have the spring teeth, a bunch of them. Just south of Brodhead,WI in IL ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: Ray
Date Posted: 15 Apr 2011 at 1:03pm
| Hi: Do not want to get in to some one elses deal. The springs you need are about 48 in around with out the shovel. They are about 1/2in thick. The cult. springs are about 40 in around. There are two of them one on top of the other. I have all of the above springs. The caps go on a 1 3/4in tool bar. I have them. 785-353-2392 |