Construction and other equipment

Print Page | Close Window

Dozer epinions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=27093
Printed Date: 28 Jul 2025 at 6:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Dozer epinions

Posted By: good-dog
Subject: Dozer epinions
Date Posted: 10 Mar 2011 at 6:14pm

Does anyone have any thougths on a 1975 Allis Chalmers diesel crawler.Are they a good reliable machine, are parts easily found, what do you think of the price.Will want to put a backhoe attachment on
thanks see link

http://ontario.kijiji.ca/c-cars-vehicles-heavy-equipment-heavy-equipment-1975-655-Allis-Chalmers-diesel-Crawler-Loader-416-902-1921-W0QQAdIdZ238017154 - http://ontario.kijiji.ca/c-cars-vehi...AdIdZ238017154

Replies:

Posted By: Coke-in-MN
Date Posted: 10 Mar 2011 at 6:40pm

655 is update of the HD4 machine , seems a little high on price but ? AC 2200 Nat asp engine, 3 speed trany with fwd-rev clutch pack and torque converter. 655 should be pedal steer rather than lever steer.

As far ad hoe on the machine I had on on my HD4 and still have the hoe

AC 615 hoe , 14' dig , Cessna hyd rotary piston swing, 24" bucket. (which i would sell)

I found i went trough 3 axles, 1 bull gear, on input shaft gear (upper drive gear) had to machine case on both sides from load from hoe putting to much stress on rear case on bearing races.

Without counterweight machine was to light in back and would walk on front idler with loaded bucket, with hoe on machine and empty bucket it walked on rear sprockets, weight transfer was real bad ..

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."