WD-65 3 Point Conversion Update
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24347
Printed Date: 22 Nov 2024 at 11:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD-65 3 Point Conversion Update
Posted By: Zyta
Subject: WD-65 3 Point Conversion Update
Date Posted: 19 Jan 2011 at 3:58pm
Made the lift arm changes worked out great!
|
Replies:
Posted By: Zyta
Date Posted: 19 Jan 2011 at 3:58pm
|
Posted By: Zyta
Date Posted: 19 Jan 2011 at 3:59pm
|
Posted By: Zyta
Date Posted: 19 Jan 2011 at 3:59pm
|
Posted By: Zyta
Date Posted: 19 Jan 2011 at 4:00pm
|
Posted By: dsgraf
Date Posted: 19 Jan 2011 at 5:36pm
| hmmmmmmm.. I like this! Are the links from a Ford? What did the brackets come from that are on the lift arm hands? Nice work? |
Posted By: Zyta
Date Posted: 19 Jan 2011 at 7:56pm
| The three point system/arms sway bar and bottom brackets which are not installed yet so not in the photo are off a David Brown. The two attachments pieces to the snap coupler arms are of an allis plow. |
Posted By: Dakota Dave
Date Posted: 19 Jan 2011 at 9:25pm
| I hope you have something to keep that 11 hole drawbar from twisting in the pull bar. |
Posted By: Zyta
Date Posted: 20 Jan 2011 at 3:39pm
|
The 11hole drawbar is just sitting on the pull bar nothing finalized yet. I am still looking for good advise or examples of how to fabricate something down there to hold the arms. Still trying figure out how to make a good soild third link.
Jim
|