Print Page | Close Window

Allis equipment in a Lime plant

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=23576
Printed Date: 23 Sep 2024 at 4:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis equipment in a Lime plant
Posted By: Skyhighballoon(MO)
Subject: Allis equipment in a Lime plant
Date Posted: 06 Jan 2011 at 7:06pm
Ran across this company answering a post over on YT.  Was very interesting to see the mention of Allis-Chalmers equipment in the plant write-up.  Mike

http://www.graymont.com/locations_tacoma.shtml - http://www.graymont.com/locations_tacoma.shtml


-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers



Replies:
Posted By: Calvin Schmidt
Date Posted: 06 Jan 2011 at 8:27pm
If you click on the link and then click on to the plants in the Eastern US and then click on the Pleasant Gap PA plant. On the picture are 6 new concrete silos that we built for Graymont in 2004. The major expansion was the new kiln. The project manager said that they had Allis-Chalmers equipment in some of their plants and it was very good equipment. Some lines of A-C kilns became part of Metso. Metso was part of this project. Since I had clearance, I checked all their bone yards for A-C bones but didn't find any. Pleasant Gap is only a few miles from Center Hall where the GOTO was a few years ago.

-------------
Nothing is impossible if it is properly financed


Posted By: DonBC
Date Posted: 06 Jan 2011 at 9:06pm
Another interesting fact for me is that Texada Island is in close proximity to the island that we live on. They have had a huge quarry operation going on there for years. It is not all that big a distance to deliver Tacoma either. They barge crusher screenings from Texada for use on our gravel roads. Unfortunately it has some undesirable characteristics in wet weather which we get a lot of this time of year. It is locally referred to as Texada slime. It gets slimy when wet and sticks to the underside of vehicles and then hardens when it dries out. It is also a little caustic so attacks brake, exhaust and suspension components.
There is an on going battle to have it banned from our roads but it cheap and easy to get delivered compared to more conventional gravel


-------------
Jack of all trades, master of none



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net