Farm Equipment - Initial vvle setting on assembly of 160?

Print Page | Close Window

Initial vvle setting on assembly of 160?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22662
Printed Date: 13 Feb 2025 at 12:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Initial vvle setting on assembly of 160?

Posted By: Dave H
Subject: Initial vvle setting on assembly of 160?
Date Posted: 21 Dec 2010 at 2:44pm

I am slowly getting the D 15 II motor back together. tody I finished torquing the head and put the rocker assembly on. I got the Jensales manual and thought I would just look up the intial assembly setting instrctions. Something like bring No 1 to TDC on compression stroke and adjust valves so and so. then move the crank to and set the rest.

I did not find anything. Can somebody give me a stear in the right direction for the initial assembly?

Replies:

Posted By: Dave H
Date Posted: 21 Dec 2010 at 2:50pm

jees vvle = valve

Posted By: Dave H (NE)
Date Posted: 21 Dec 2010 at 3:15pm

the best way is to adjust each cylinder in turn at top center in-.008-.010 ex-.014-.016 hot

Posted By: Dave H (NE)
Date Posted: 21 Dec 2010 at 3:17pm

in-.012 ex-.018 cold

Posted By: Dave H
Date Posted: 21 Dec 2010 at 5:51pm

Dang, I guess I had my gears in neutral. that will work Dave.

I was jut thinking bck to yesteryear when you could do tht easy/less rotating method on the small block chebies. happy holidays.