8050
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=22343
Printed Date: 13 Feb 2025 at 6:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8050
Posted By: wheatbreeder
Subject: 8050
Date Posted: 15 Dec 2010 at 10:14am
|
what would make my battery and engine oil light stay the battery light usually goes out after 1200 rpm
thanks
Morley
-------------
Farm stuff 8050,6690,175,F2,5050,WD
|
Replies:
Posted By: michaelwis
Date Posted: 15 Dec 2010 at 10:19am
MY 7040 DID the same thing .. i just quit lookin at the light and got over it .. touchy sensor ?
-------------
WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer
|
Posted By: Lonn
Date Posted: 15 Dec 2010 at 11:33am
sender unit on the oil pressure most likely. Pull the wire off the sender and ground it to engine block and see if light goes out.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
Posted By: Unit3
Date Posted: 15 Dec 2010 at 11:46am
|
Just to be safe, I would put a gauge on the block and check to see how much PSI I did have. I like to sleep at night.
|
Posted By: wheatbreeder
Date Posted: 15 Dec 2010 at 3:01pm
|
Electricity is a funny thing I sensor wire was not contected shame on me the lights still came on after 5 minutes of running the went out bad grounds or ghosts thanks for the help Morley
-------------
Farm stuff 8050,6690,175,F2,5050,WD
|
|