Farm Equipment - AC WD Hydraulic Pump

Print Page | Close Window

AC WD Hydraulic Pump

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21928
Printed Date: 12 Feb 2025 at 1:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC WD Hydraulic Pump

Posted By: dberger
Subject: AC WD Hydraulic Pump
Date Posted: 07 Dec 2010 at 11:36am

Hi!

I am new to this forum...and already I have a question.

I am currently working on an AC WD and have discovered that the hydraulic pump has a seized cylinder. Any idea how to remove it without destroying it? It has never worked since I've had this tractor and I'm wondering (if I get it back together) whether it is sufficient for normal 3 point hitch implements?

Replies:

Posted By: Hubert (Ga)engine7
Date Posted: 07 Dec 2010 at 11:59am

Welcome to the forum. The WD hydraulics will handle 3 point implements with no problem. It is a high pressure system and should have enough volume to not be too slow with the 3 point. Someone more experienced than myself will probably chime in with suggestions on how to repair the pump. If it is beyond repair many of the vendors listed on here have used and/or rebuilt pumps available.

-------------
Just an old country boy saved by the grace of God.

Posted By: CTuckerNWIL
Date Posted: 07 Dec 2010 at 12:07pm

If a plunger is stuck, soak it in some Kroil or PB blaster and lightly tap on it a couple times. Don't drive it all the way in if it is out a ways, just tap, tap, tap. If it moves, give another day to soak and tap on it again. The longer it soaks before tapping the better chance you have of getting it out this way. If it acts like it won't move, maybe try twisting it back and forth some.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF