"G" surging
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21831
Printed Date: 12 Feb 2025 at 11:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: "G" surging
Posted By: Dwayne TX
Subject: "G" surging
Date Posted: 05 Dec 2010 at 3:27pm
|
My G revs up and down. I can see the governor rod moving when it's doing it. If I hold the rod, it idles normally. I compared the rod to a couple of other G's and mine is two-piece with a clamp, while the other two are solid. Do I need a new spring or does the rod need adjusting? |
Replies:
Posted By: Dick L
Date Posted: 05 Dec 2010 at 5:53pm
You have an adjustment screw that can be seen just below the spring linkage.
It is a surge damper adjustment. Bottom right of the picture with a jam/lock nut.
Give that a try.
|
Posted By: JoeM(GA)
Date Posted: 05 Dec 2010 at 6:50pm
see if this helps  ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |