Farm Equipment - Adding power steering to WD45

Print Page | Close Window

Adding power steering to WD45

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21823
Printed Date: 12 Feb 2025 at 1:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adding power steering to WD45

Posted By: bluebanshee
Subject: Adding power steering to WD45
Date Posted: 05 Dec 2010 at 12:28pm

I don't think I've ever read anything about making a power steering unit from off the shelf parts. Why couldn't I add a torque generator and an automotive style power steering pump ran off the crank? Is there something I'm missing as to why people don't do this? $300 in new parts and an old pump laying around would seem like a cheap way to go vs. the factor or aftermarket setups designed for the tractor.

Replies:

Posted By: Steve M C/IL
Date Posted: 05 Dec 2010 at 2:22pm

Since you've only been here since 6/19/10, I'd say you missed it.It can and has been done.

Posted By: Joe(TX)
Date Posted: 05 Dec 2010 at 9:21pm

Almost any pump will work with the Charlynn torque generator. The Charlynn pump is also known as an Eaton pump and was common on Ford and Chrysler cars in the 50's and 60's.