Farm Equipment - 7000 black belly hydraulics

Print Page | Close Window

7000 black belly hydraulics

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212539
Printed Date: 17 Oct 2026 at 3:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 black belly hydraulics

Posted By: Adam Stratton
Subject: 7000 black belly hydraulics
Date Posted: 17 Oct 2026 at 2:11pm

I recently started having issues with my black belly 7000 I use to bush hog with. The first symptom was when I first would start using the bush hog sometimes the pto would disengage when I would shift the powershift. This normally quit after I had worked it for a while. The last time I used it, that was much worse and I wasnt able to raise or lower the wings on the mower. I have plenty of the correct fluid in it (both compartments). It still steers fine. Where do I need to start? Its been a while, but I have adjusted the stand by pressure on the 7060 type tractors but this isn't the same system and im a little fuzzy on the routine anyway. Thanks in advance.