Farm Equipment - 8070 question

Print Page | Close Window

8070 question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=212519
Printed Date: 15 Oct 2026 at 3:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8070 question

Posted By: cjarosz
Subject: 8070 question
Date Posted: 15 Oct 2026 at 2:21pm

I’ve been looking for a good row crop tractor 150+ horse, missed out on what seemed to be a good 9170 deutz but last night I found a 8070 two wheel drive but it doesn’t have power shift rims and looks like it is set a little wide for 30” rows. My question is can I move the wheels in enough without power shift rims and I ask because a few years ago I bought my 7060 with 34” rears but drop center rims and 36” centers is as close as I can get the rear tires into

Replies:

Posted By: DrAllis
Date Posted: 15 Oct 2026 at 2:53pm

Pretty sure you are correct....it takes Power Shift wheels to get them into the cab. I wouldn't let that keep me from buying it. Weld some ears/flags to the rim and just bolt it to the inside of the cast center. Then, adjust the wheel center in or out to get it exactly where you want it. Some have done this going from 38 to 42 inch tires.

Posted By: cjarosz
Date Posted: 15 Oct 2026 at 3:47pm

Ok thank you so much