Farm Equipment - 200 Steering Wheel Removal

Print Page | Close Window

200 Steering Wheel Removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211883
Printed Date: 18 Sep 2026 at 6:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 Steering Wheel Removal

Posted By: Unit3
Subject: 200 Steering Wheel Removal
Date Posted: 03 Aug 2026 at 4:50pm

I am trying to replace the steering wheel on the 200. I have the 1-1/4” nut off. I have sprayed JB80 on the splines. I have taped on the spokes, but it hasn’t broke loose yet. Any ideas?

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Replies:

Posted By: DrAllis
Date Posted: 03 Aug 2026 at 5:43pm

Chances are VERY GOOD you will destroy it during the removal process. Are you removing it because you want to install a new steering wheel ?? If so, take a 3 lb hammer and bust all the plastic off around that hub. Get a good 3-jaw puller and put it under good tension. Quickly heat that hub red top to bottom and it should pop. Also, the same method could work without a torch by splitting the hub down to the splines with a cutting disc.

Posted By: Unit3
Date Posted: 03 Aug 2026 at 9:02pm

Thank you Doctor. I want to replace it with a 7000 series.

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C