8030 seat
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211792
Printed Date: 18 Sep 2026 at 6:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 seat
Posted By: SilverShoes
Subject: 8030 seat
Date Posted: 26 Jul 2026 at 1:56pm
| Can anyone recommend a good seat that is reasonably priced. Not in the seat a lot anymore |
Replies:
Posted By: 8070nc
Date Posted: 27 Jul 2026 at 7:22am
|
I put a 1061 from k&m manufacturing at tractor seats.com in mine but that might be more than you want ti spend. Somebody had a nice looking seat i think frim vevor on the firum a while back but it was just the seat in a 7000 series. My finger must be one sided. It hits the i instead of o ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: TedN
Date Posted: 27 Jul 2026 at 10:11am
If you are looking for just the seat this is what I put in my 7000. If you google Vevor universal forklift seat it should pop up, looks like the price is around $200 currently. It has adjustment on the backrest and the armrests, and it comes with a headrest that I haven't put on because the tractor is mostly used for baling. It also has a seatbelt. The one thing I did that I don't like is I left the slide rails on it and it adds a little more height than I like. I plan to remove them, just haven't done it yet. I haven't had a lot of time in it yet but have no complaints so far. Ted ------------- 190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7030, 7045, D14, 190XTD series??? project(or maybe parts) |
Posted By: SilverShoes
Date Posted: 27 Jul 2026 at 7:10pm
| Thanks, I was looking at that seat and thought maybe it was pretty low quality. I might just try that seat and see how it works out. Cloth seats seem to wear out pretty fast from sliding in and out of them. |
Posted By: Leadoff
Date Posted: 27 Jul 2026 at 7:34pm
|
SilverShoes Here is a link to a Thread on this Forum regarding sourcing a replacement for the original seat on a AC 210, the black seat with the fold down arm rests https://www.allischalmers.com/forum/topic209018.html" rel="nofollow - Allis 210 seat - AllisChalmers Forum Perhaps the Marathon Seat(supplied to AC factory for 185, 200, 7000 and 8000 tractors by Milsco, Milwaukee Seat Co) would meet your needs. Thread has link to the supplier. A and W Tractor, excellent AC parts website Good luck with your project ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |
Posted By: SteveM C/IL
Date Posted: 28 Jul 2026 at 9:19am
| Good and reasonable don't seem to go together much. |
Posted By: TedN
Date Posted: 28 Jul 2026 at 10:37am
|
I'll start off by saying I only have been in it a total of maybe ten hours so far, but I don't have any complaints other than the height, which I plan to correct. I have to set my seat suspension soft to get my feet comfortably on the cab floor, so it bottoms out occasionally. That is not the fault of the seat but can be blamed on the installer. Maybe I lucked out and got the only good one out of the run, I don't know. It is a lower priced seat, so I won't be surprised if the foam starts to break down early, but I thought it would be worth a try. I only put 50-60 hours a year on this tractor, so I should get several years out of it. Ted ------------- 190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 7030, 7045, D14, 190XTD series??? project(or maybe parts) |
Posted By: SilverShoes
Date Posted: 30 Jul 2026 at 7:08am
| I ordered the vevor seat, I think it will be fine. I’m trying to save some money so I can buy the headliner and interior foam kit. I wish it was all black but it’ll be ok for now. The orange segments just don’t seem symmetrical with the saddle tan interior. But I’m sure it’ll be fine, nothing gained nothing lost. |
Posted By: 8070nc
Date Posted: 30 Jul 2026 at 10:38am
|
If you dont like the orange you could get some Sem interior dye and make it all black ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: AC7060IL
Date Posted: 01 Aug 2026 at 7:19am
| Silvershoes, did you try pricing a restoration of the 8030s OEM seat at a local upholstery shop? |
Posted By: SilverShoes
Date Posted: 03 Aug 2026 at 9:20pm
| No I did not. I had it redone once already. I will probably keep the seat and take it in to get it redone to put in another tractor. |
Posted By: WF owner
Date Posted: 04 Aug 2026 at 5:25am
|
I don't know about in your area, but the guys that do reupholstery in our area are ridiculous in price. We inquired about having the couch for our RV done and the quote was $1500. He had a set of boat seats he was working on. I would hate to see the bill on them.
|