CA Motor to D10
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211644
Printed Date: 18 Sep 2026 at 8:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA Motor to D10
Posted By: Gary Burnett
Subject: CA Motor to D10
Date Posted: 10 Jul 2026 at 7:27am
| Have a D10 that needs a motor and a CA with a busted rear with a good motor.Anything special I need to know mating the CA motor to the D10 rear? |
Replies:
Posted By: PaulB
Date Posted: 10 Jul 2026 at 7:59am
|
Use the flywheel/clutch for the tractor. Some D10/12 tractors have 5/8" bolt for the front support but if your has 1/2" it will bolt up without a problem. The CA thermostat housing will line up with the D10/12 radiator, but the temperature gauge will interfere with the hood. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: dfwallis
Date Posted: 10 Jul 2026 at 12:35pm
|
Lose 5 or 6 hp vs stock d10 unless rebuilt with an overbore kit? ------------- 1952 CA13092, CA Pickup Plow, CA Cultivator, CA Two Row Planter, Dunham-Lehr GC78 Disc, Grader Blade, 3pt Fm180 Finish Mower |
Posted By: Bill Deppe/AC Salvag
Date Posted: 12 Jul 2026 at 2:37pm
| CA engine doesn't have the opening for a pump under the distributor |
Posted By: PaulB
Date Posted: 12 Jul 2026 at 2:47pm
If the tractor doesn't need the engine driven pump, that's not a problem. Gary just want to take two non usable tractors and make one that will work. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Bill Deppe/AC Salvag wrote: