Farm Equipment - 190xt Levelling Arms

Print Page | Close Window

190xt Levelling Arms

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211339
Printed Date: 05 Oct 2026 at 5:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt Levelling Arms

Posted By: MadCow
Subject: 190xt Levelling Arms
Date Posted: 11 Jun 2026 at 4:01pm

Is there a replacement available for the 3pt levelling arms on these? Or has anybody had luck replacing with a universal/other make? They look fairly standard. I would prefer with the levelling crank as opposed to the centerlink style spinning tube.

Previous owner welded the arms on mine so they no longer turn.

Replies:

Posted By: 8070nc
Date Posted: 12 Jun 2026 at 7:10am

I got new ones for a D17. I think they are the same. I found them online somewhere but i dont remember where

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: DrAllis
Date Posted: 12 Jun 2026 at 7:16am

The old original design was fine threads of the screw and tube. After a few years of thread failure, they went with coarse threads. There is no mixing of the different parts, but as an assembly they will fit any tractor newer or older. Welded parts is a pretty sure indication the threads are stripped.

Posted By: AveryD12
Date Posted: 12 Jun 2026 at 7:33am

The previous owner of my D12 welded/brazed a nut on the female part of the lift. Which tells me the female threads were stripped. Since you don’t know if the male or female threads (or both) are stripped it would be a gamble to try to salvage this and possibly cut new threads on the male piece and weld a nut on the female piece. It may be worth a try if you can’t find a suitable replacement.

Posted By: 8070nc
Date Posted: 12 Jun 2026 at 7:50am

DJs tractor parts has them. Im dont know but i would think they could be found elsewhere

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: MadCow
Date Posted: 12 Jun 2026 at 10:43am

Does anybody know the extended and collapsed length? I would guess most any leveling arm would work if the pin sizes were right and the travel length was right.