Farm Equipment - 301 gleaner motor

Print Page | Close Window

301 gleaner motor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=211308
Printed Date: 27 Sep 2026 at 5:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 301 gleaner motor

Posted By: rick ky
Subject: 301 gleaner motor
Date Posted: 08 Jun 2026 at 7:19am

lets try this again, what is needed to put a 301 gleaner engine in a 7045 chassis?

Replies:

Posted By: DrAllis
Date Posted: 08 Jun 2026 at 7:49am

To start with, you'd like to have a 7010-20 engine backplate and a flywheel to match which transmission is in the 7045 chassis. Front motor mounts can be fabbed. Air conditioner compressor brackets are all different and hoses might not reach. You might be able to mount the compressor in a similar location front left side by making your own brackets. Coolant hoses will be easy I think. Exhaust pipe (not a muffler) elbow can be fabbed or maybe a straight pipe will hit the hood hole anyway. Throttle/governor controls will have to be fabbed up unless you can find a 190/XT gas engine to steal from.