Print Page | Close Window

AC 175 adding joystick and power beyond

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210486
Printed Date: 25 Mar 2026 at 3:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: AC 175 adding joystick and power beyond
Posted By: Tracy Martin TN
Subject: AC 175 adding joystick and power beyond
Date Posted: 22 Mar 2026 at 8:06pm
Adding joystick and power beyond on my 175 D. The lines on it are coupled LH  side of tractor just beyond start of frame rail. Is there a kit for this, or does most people build their own? Where are most running return to sump from? I have a schematic, but would love to see pics of a well run one.  Any help appreciated. Thanks, Tracy

-------------
No greater gift than healthy grandkids!



Replies:
Posted By: Tracy Martin TN
Date Posted: 24 Mar 2026 at 5:09pm
Any help appreciated! Tracy

-------------
No greater gift than healthy grandkids!


Posted By: IBWD MIke
Date Posted: 25 Mar 2026 at 6:44am
I'd help if I could Tracy!


Posted By: DrAllis
Date Posted: 25 Mar 2026 at 7:19am
I have no pics to help. On a 170 thru 185, I like my joystick's location between the throttle and right fender so I can shift gears with my left hand. Power beyond valve sump return is very low GPM (when done correctly) and I'd probably remove the large return elbow on the left side of the torque housing, drill and thread it to 1/4" NPT on one side and drain the power beyond valve there.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net