D14 steering thread
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210408
Printed Date: 16 Mar 2026 at 4:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 steering thread
Posted By: AC720Man
Subject: D14 steering thread
Date Posted: 15 Mar 2026 at 8:24pm
Ordered a new nut for my D14 steering column. Replaced the steering wheel and wanted to replace the rusted nut. But it seams like it doesn’t like the steering column threads. Anyone know the thread size? The steering column threads don’t look damaged. I’m beginning to think the new nut is incorrect.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Replies:
Posted By: IBWD MIke
Date Posted: 16 Mar 2026 at 6:28am
|
When I changed the wheel on my 15 it seems to me that the nut was some bastard thread. Been long enough ago I don't remember what it was. Mine was not in good shape either but I did manage to reuse it.
|
Posted By: JoeM(GA)
Date Posted: 16 Mar 2026 at 8:38am
if I remember right, it’s something odd like a 13/16-20 ultra fine, I had to help my buddy Herb clean his up with a hacksaw blade because we couldn’t find a die anywhere
-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB
|
Posted By: ACinSC
Date Posted: 16 Mar 2026 at 10:22am
|
13/16-20 is my size on my D 15 like Joe said. I got a die from Brenda.Good luck
|
|