CA oil pump damage?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209909
Printed Date: 21 Mar 2026 at 5:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA oil pump damage?
Posted By: J&J
Subject: CA oil pump damage?
Date Posted: 30 Jan 2026 at 7:20pm
This is the oil pump body from a ca tractor 125 engine. You can see down in the bore where the rotor shaft rides is pretty scarred up, looks worse than it feels though, I assume there's no fixing it. Anyone have a good oil pump for a ca? I do have a new rotor kit coming. Thanks |
Replies:
Posted By: steve(ill)
Date Posted: 31 Jan 2026 at 7:58am
|
how much clearance do you have between the shaft and the bore ? There looks like GROOVES in the bore ?? If minimal clearance, i would reuse and the groves might help lube the shaft ?? If you have excessive clearance, you could have it bored and a brass sleeve installed... but might be cheaper to find a USED PUMP and rebuild it..
several on e-bay for $40 - 75. ------------- Like them all, but love the "B"s. |
Posted By: J&J
Date Posted: 31 Jan 2026 at 10:35pm
| I haven't received the new rotor yet, so not sure about clearance between the new shaft. I'm thinking run a light hone through it, leave the grooves there and seen how much play the shaft has. I checked eBay, their all assembled so your not really sure what your getting on the inside. I'd take a known good one... |