Allis d17 series 4 fender stabilizers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209888
Printed Date: 21 Mar 2026 at 9:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis d17 series 4 fender stabilizers
Posted By: Putnamd17
Subject: Allis d17 series 4 fender stabilizers
Date Posted: 28 Jan 2026 at 9:57am
|
How do the stabilizers/hand rail looking pieces mount to the plate that the fender mounts to, I repainted the tractor and can’t remember how they go on there they don’t not fit onto the bolts that I threaded into the tractor. Thanks |
Replies:
Posted By: orangereborn
Date Posted: 28 Jan 2026 at 12:41pm
| hole on lower front corner of fender to platform?? |
Posted By: DrAllis
Date Posted: 28 Jan 2026 at 2:21pm
| Series 4 uses 1/2" bolts to the axle at the top hole and rear hole. The front hole has a 3/8" bolt that secures that fender brace. Knowing this, you'll figure it out. The brace end goes on the inside of the axles front ear, while the fender mounting plate goes on the outside. |
Posted By: 55allis
Date Posted: 28 Jan 2026 at 6:43pm
|
Are they the same as the series 3? I’ve got pictures of my series 3 mounts. ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3, several Allis garden tractors 
|
Posted By: DrAllis
Date Posted: 28 Jan 2026 at 6:52pm
| Series 3 and 4 the same design. |