Farm Equipment - Cleaner E combine engine to WD tractor swap

Print Page | Close Window

Cleaner E combine engine to WD tractor swap

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209014
Printed Date: 22 Nov 2025 at 6:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Cleaner E combine engine to WD tractor swap

Posted By: Kris5s64
Subject: Cleaner E combine engine to WD tractor swap
Date Posted: 21 Nov 2025 at 6:36am

What modifications &/or adaptations need to be made when swapping a Gleaner E combine engine into a WD Allis tractor?

Replies:

Posted By: Doug Acord
Date Posted: 21 Nov 2025 at 1:44pm

You will need the front cam Cover off the WD ,to use the WD governor, and will have Drill the Holes in the cover to match to the block. Need a WD style water pump. The front Crank pulley of the WD will need to bored out to fit the E crank also the set screw will need to fill in and move to make the Belt line up to the water pump pulley. If is a full flow oil system the one oil line will need to be reroute and the steering yoke on the side of the tractor will need to shorted to let the oil line pass. Last was the block need to place in the tractor and see it will hit the frame at the governor case it does just grind out the spot on the block to make it fit.

Posted By: SteveM C/IL
Date Posted: 21 Nov 2025 at 9:18pm

My oil lines do not interfere with steering. I bent and rerouted new lines