Farm Equipment - Diesel D17 parts/ NOS radiator question

Print Page | Close Window

Diesel D17 parts/ NOS radiator question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208369
Printed Date: 02 Oct 2025 at 4:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Diesel D17 parts/ NOS radiator question

Posted By: Rusty Allis
Subject: Diesel D17 parts/ NOS radiator question
Date Posted: 30 Sep 2025 at 9:19pm

Group~

I have a diesel D17 that has been partially taken apart (long story) and I think I want to sell it. That said, I know I could sit and part the whole thing out....which would take the rest of my life so I'd much rather sell it as it sits.

I also have a new from A/C radiator for the same machine. It was stored in a bit of a damp location so the box is like corn flakes (take that as 100% not useable) but I can prove it was direct from A/C

All that said, I have no idea what this stuff is worth. So what would a fair price on this stuff be? Not looking to get rich, just want to be fair. I can provide photos in the next day or so if anyone is interested.

Located in Connecticut

Replies:

Posted By: Ray54
Date Posted: 01 Oct 2025 at 1:56pm

Other than the value of the radiator, with the information you have given it is worth its weight as scrape iron.For it to have value, what parts are apart? Do the tires hold air, is the tin a bent up or straight?

Posted By: DiyDave
Date Posted: 01 Oct 2025 at 3:51pm

If the radiator is NOS, it's likely worth at least $700, put it on the classifieds... Wink

-------------
Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!

Posted By: Rusty Allis
Date Posted: 02 Oct 2025 at 3:40pm

Ray54 wrote:

Other than the value of the radiator, with the information you have given it is worth its weight as scrape iron.For it to have value, what parts are apart? Do the tires hold air, is the tin a bent up or straight?

Then scrap it is

I'll grab some photos. I have zero problem turning it into Kia mufflers but knowing they are kind of rare I'd rather pass it along to someone who can use it.

I'll snap some photos

10-4 on the radiator. Oddly, I think my D17 gasser needs one and this one is way, way different