8010 powershift clutch adjustment
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207938
Printed Date: 27 Aug 2025 at 2:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8010 powershift clutch adjustment
Posted By: lentsch
Subject: 8010 powershift clutch adjustment
Date Posted: 25 Aug 2025 at 9:50pm
|
Trans brake seems to grab without pushing clutch pedal very far. Owners manual is no help and I don't have a service manual, so any help is appreciated. ------------- WD,D15,190XT,7000,8010x2,7060,8070 |
Replies:
Posted By: PaulB
Date Posted: 26 Aug 2025 at 6:39am
For a in service adjustment, a service manual would be the best place to start, wouldn't it  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
lentsch wrote:Posted By: DrAllis
Date Posted: 26 Aug 2025 at 7:29am
| Start by removing the right side step and swing out the battery tray. I don't remember for sure how accessible it is, but the inching spool should be able to have a .010" to .030" feeler gauge inserted between the arm and the end of the spool. The goal here is to not be bottoming out the inching spool when the inching pedal is clear up. We want it almost bottomed out, so I shoot for the .010" dimension when I can. This adjustment is FIRST before you change anything else related to the transmission brake on a PS tranny. |