Adjustable rims
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207931
Printed Date: 27 Aug 2025 at 2:16am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Adjustable rims
Posted By: Huolti
Subject: Adjustable rims
Date Posted: 25 Aug 2025 at 1:39pm
| I have a restored AC WD with adjustable rims. I cannot keep them tight on wedges and the kept sliding in. Are the wedges in the rim clamps worn enough to not tighten enough. Looked for new ones but can’t find any. |
Replies:
Posted By: DrAllis
Date Posted: 25 Aug 2025 at 1:51pm
| You are missing a piece at each eccentric location. The eccentric doesn't contact the wheels rail. There is a piece that goes between them. It is called a "block" in AGCO Parts books. |
Posted By: DSeries4
Date Posted: 25 Aug 2025 at 3:16pm
 
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Alberta Phil
Date Posted: 25 Aug 2025 at 6:04pm
| Where are you in Alberta? I have several complete sets of those clamps with the blocks. |
Posted By: PaulB
Date Posted: 26 Aug 2025 at 6:42am
|
Also needed are the stop blocks the go on the drilled rail with a bolt. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |