Farm Equipment - Allis chalmers C

Print Page | Close Window

Allis chalmers C

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207759
Printed Date: 15 Aug 2025 at 9:45am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis chalmers C

Posted By: Ttague39B
Subject: Allis chalmers C
Date Posted: 11 Aug 2025 at 7:59pm

Hi, new to this forum but been using its info for years. I have a 1943 allis C that came with a wide front end, and from what I understood they only came narrow from factory unless ordered with a loader. However I see so many with a wide front. How come? And should I use the wide or a narrow front end I have?

Replies:

Posted By: WF owner
Date Posted: 11 Aug 2025 at 8:14pm

The C was available with either a narrow or wide front end, although there seem to be a lot more narrow.

The C did not have a frame and putting a loader on them put a lot of presssure on the torque tube.

Posted By: Ttague39B
Date Posted: 11 Aug 2025 at 8:17pm

Okay, thank you, seen very conflicting opinions and just wanted a solid answer.

Posted By: AaronSEIA
Date Posted: 12 Aug 2025 at 5:45am

Also, many of the wide front C are using a B front end. Farmer done, not factory.

AaronSEIA

Posted By: Kip-Utah
Date Posted: 12 Aug 2025 at 7:26am

During the 10 year production run about 600 Cs were also built with single front tires.

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!