Farm Equipment - wd45 power steering reservoir gasket

Print Page | Close Window

wd45 power steering reservoir gasket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207673
Printed Date: 12 Aug 2025 at 2:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: wd45 power steering reservoir gasket

Posted By: sling-it
Subject: wd45 power steering reservoir gasket
Date Posted: 04 Aug 2025 at 8:03am

I've got a Char-Lynn power steering pump on my WD45, and the darn thing simply will not seal. Does anyone have a source for the rubber gasket for the lid? I tried cork, but it won't quit leaking until it gets about half empty. It's roughly 5 1/2 in diameter, and I just don't know where to look for it, and I've got a feeling cutting one myself is just another recipe for failure

Replies:

Posted By: albatros_3
Date Posted: 04 Aug 2025 at 10:52am

I had the same problem with the resevour on my system. I added some gasket maker to both sides of the cork gasket and that fixed that leak.

Posted By: PaulB
Date Posted: 04 Aug 2025 at 3:25pm

Get a new rubber gasket from Stiener for a 600-800 Ford with the Eaton PS Pump it will be the same.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY