Construction and other equipment - Caterpillar Dealer locations

Print Page | Close Window

Caterpillar Dealer locations

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20760
Printed Date: 19 Jul 2025 at 3:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Caterpillar Dealer locations

Posted By: Dale
Subject: Caterpillar Dealer locations
Date Posted: 13 Nov 2010 at 8:16pm

Going to be traveling from Ontario to South Carolina on business via I 90 and I 79. Anyone know of a good, decent sized Cat dealer along the way. Need transmission bearings etc.. parts for my old D4. Tried shipping in from the States but ran into some rule that one Cat dealer can't ship into another 's territory. Unfortunately, my area Cat dealer is very large and scary expensive. Thought I'll try to stop in and buy over the counter. Any thoughts would be certainly appreciated.

Replies:

Posted By: Coke-in-MN
Date Posted: 13 Nov 2010 at 8:58pm

You may be better off using a independent shop for parts, bearings especially . I bought most of the parts for my D6-9U from a small repair shop in Osseo MN , Northern Tractor.

He had everything i needed or got it in a day or so.

Yes CAT plays that deal of not selling outside their area, so if you have problems with dealer , your up the creek ..

Another source might be Northern Engine out of Duluth MN, or Crawler Welding in Mankato MN

Can also check for Rock and Dirt on web, they have many dealers for Cat parts listed as aftermarket suppliers.

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Dale
Date Posted: 14 Nov 2010 at 8:11am

Thanks Coke-Will follow-up with them.Appreciate the help.

Posted By: Jack(Ky)
Date Posted: 14 Nov 2010 at 8:43pm

If you have the generic part numbers that are stamped on the bearings I can get you any brand you want but I mainly sell Timken. You can go to Froedge.com or email me at mailto:j.proffitt@froedge.com - j.proffitt@froedge.com . We will be glad to help you avoid the Cat prices. Check out our new website. We are picking up new customers daily from around the nation. I am the parts manager there. We deal direct with several manufactures and pass the savings along to the customer.JP