AC 6080
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207461
Printed Date: 17 Jul 2025 at 7:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 6080
Posted By: 42324232
Subject: AC 6080
Date Posted: 13 Jul 2025 at 8:28pm
|
Range stuck in low. Is there a diagram for the linkage somewhere? Any advice was working fine then wouldnt shift.
|
Replies:
Posted By: AC7060IL
Date Posted: 14 Jul 2025 at 7:11am
42324232, Welcome to the AC forum. Try this agcopartsbook link & scroll thru it to drivetrain transmission to view parts schematics.
https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79005853/l&name=6080+TRACTOR" rel="nofollow - https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79005853/l&name=6080+TRACTOR
If for any reason link or site gets indifferent. You can start over on it homepage by clicking “parts book” icon. Then enter “6080” for model. Then choose 6080 parts. Then choose drivetrain again.
|
Posted By: tbran
Date Posted: 14 Jul 2025 at 1:59pm
Maybe this will not be the case - but in the past had one run w/o oil in tranny and planetary syncro was seized ?
-------------
When told "it's not the money,it's the principle", remember, it's always the money..
|
Posted By: 42324232
Date Posted: 14 Jul 2025 at 3:47pm
|
hooked up implement got back in and wouldnt shift into range got beneath tractor and got it shifted but cant get it shifted again. linkage has a problem. Range shift arm is not attached?
|
Posted By: DrAllis
Date Posted: 14 Jul 2025 at 4:03pm
|
The 4-speed lever and the RANGE lever are built into the shift cover on top of the transmission. There isn't ANY external shifting linkage.
|
Posted By: DougG
Date Posted: 14 Jul 2025 at 5:18pm
|
Had that problem once - but bought one that had been setting , spraying a bunch of penitrating oil down the rubber boot, seems the shifter just needs lube
|
|