Garden Tractors - 312H Snowblower Information

Print Page | Close Window

312H Snowblower Information

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207207
Printed Date: 25 Jun 2025 at 5:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 312H Snowblower Information

Posted By: Heather
Subject: 312H Snowblower Information
Date Posted: 23 Jun 2025 at 6:23pm

I just bought an Allis Chalmers 312H and need to remove the mower deck and install a snowblower. I am looking for information on how to put the snowblower on and not having any luck. Hope to find some information on how to do it versus just winging it. Might need to buy some drive belts and knowing the right size would be a plus.

Replies:

Posted By: Mikez
Date Posted: 23 Jun 2025 at 8:35pm

Hello welcome to the forum. Can you put pictures of what you have. The snow blower takes brackets to mount.

Posted By: Heather
Date Posted: 24 Jun 2025 at 3:06pm

Having issues uploading my pictures here. I did take some pictures and today I got the mower deck off which was pretty simple. I think I figured out how to mount part of the deck to the tractor but ran into the brackets being bent. Was hoping someone might have a set of instructions on how to install the blower since I can't find anything. I will keep trying to upload pics if I can get the size reduced enough.

Posted By: Heather
Date Posted: 24 Jun 2025 at 5:11pm

uploads/25705/20250624_094719.jpg" rel="nofollow - uploads/25705/20250624_094719.jpg

Posted By: Heather
Date Posted: 24 Jun 2025 at 5:15pm

uploads/25705/20250624_140444_2025-06-24_16-42-18.jpg" rel="nofollow - uploads/25705/20250624_140444_2025-06-24_16-42-18.jpg

Posted By: Heather
Date Posted: 24 Jun 2025 at 5:28pm

uploads/25705/Blower_misc_parts_2025-06-24_17-28-39.jpg" rel="nofollow - uploads/25705/Blower_misc_parts_2025-06-24_17-28-39.jpg

Posted By: Mikez
Date Posted: 24 Jun 2025 at 9:14pm

Let us look for operators manual