Farm Equipment - D 15 PTO Shift Lever O Ring

Print Page | Close Window

D 15 PTO Shift Lever O Ring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206382
Printed Date: 20 May 2025 at 3:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 15 PTO Shift Lever O Ring

Posted By: Loren-ia
Subject: D 15 PTO Shift Lever O Ring
Date Posted: 20 Apr 2025 at 5:02pm

The O ring on the PTO shift lever on my D 15 series 2 needs to be replaced. Wondering if the tractor has to be split or can it be done through the torque housing cover.

Thanks for any advise.

Replies:

Posted By: only AC orange
Date Posted: 20 Apr 2025 at 6:44pm

I have been told by a retired AC mechanic that the arm/shaft can be pried to the left and roll an O-ring into place. I can't do that on. mine, no clearance between arm and housing! vGood luck!

Posted By: Alex09(WI)
Date Posted: 20 Apr 2025 at 8:33pm

Tractor must be split to replace that o-ring.

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY

Posted By: Tracy Martin TN
Date Posted: 20 Apr 2025 at 8:51pm

It can be done without splitting tractor. It isn't the easiest job, but with ingenuity and patience it can be done. HTH Tracy

-------------
No greater gift than healthy grandkids!