Farm Equipment - 8050 blower motor

Print Page | Close Window

8050 blower motor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205911
Printed Date: 02 Apr 2025 at 2:49pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 8050 blower motor

Posted By: randy
Subject: 8050 blower motor
Date Posted: 17 Mar 2025 at 2:51pm

Is there a way to check the resistor thats next to the blower? Or does it work or not?

I keep blowing fuses but the fan motor turns freely.

Thanks Randy

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Replies:

Posted By: 8070nc
Date Posted: 17 Mar 2025 at 3:36pm

Id take the wires from the switch to the resistor off turn on the switch to make sure its not the wires between. If it doesnt blow the fuse id put those back on and take the wires from the resistor to the motor off. If the fuse doesnt blow then its the motor. If its the motor id get a high eficiency blower assembly from ap air. They are super quiet and dont use a resistor

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor

Posted By: randy
Date Posted: 18 Mar 2025 at 6:35am

Will try that.

Thanks

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Posted By: randy
Date Posted: 20 Mar 2025 at 6:58am

Well, i found the problem, bare wire on the compressor. Every time i would turn the thermostat to cold the fuse would blow. So it was a easy fix.

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Posted By: 8070nc
Date Posted: 20 Mar 2025 at 3:55pm

Fantastic. Thanks for letting us know how it turned out

-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor