family d17d sn 4526
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205900
Printed Date: 11 Apr 2025 at 12:02am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: family d17d sn 4526
Posted By: HudCo
Subject: family d17d sn 4526
Date Posted: 16 Mar 2025 at 5:21pm
brought this tractor after it was sold to a relative about 1988 and then was only used to bale with until the engine went down in 2012 then got tore donwn at a machine shop the place shutdown and the top end got scraped and tractor went back to their shed and sat until two years ago in may and they called me and told me to come get it its your and you are the only one that will do anthing withit i already had all the origial paperwork and reciepts from when it was new   f    
|
Replies:
Posted By: HudCo
Date Posted: 16 Mar 2025 at 5:27pm
| doner engine tractor going out the door but that engingine has blow by so bad it pushes oil out the filler that engine has head bolts mine with the studs sticking up was juast how i got it back so i needed the doner engine for everything from the deck up much more has been done since those photos |
Posted By: HudCo
Date Posted: 17 Mar 2025 at 10:17am
uploads/8753/IMG_1049.jpg" rel="nofollow - uploads/8753/IMG_1049.jpg     cracks above injector holes , how bad is it ? that engine did not leak coolant and did not make compression in the rad.
|
Posted By: HudCo
Date Posted: 18 Mar 2025 at 10:37pm
sofar no cracks around the valves or ports but it hasnt been magna fluxed yet 
|
Posted By: HudCo
Date Posted: 19 Mar 2025 at 10:03pm
 tube on bottom of hydrualic pump was disconnected when i took the cover off to check things and replace seals and gaskets also is their suppossed to be a screen ?
|
Posted By: DrAllis
Date Posted: 19 Mar 2025 at 10:30pm
| Very early ones did not (should have) have a screen. |
Posted By: Allis dave
Date Posted: 20 Mar 2025 at 8:26am
| Very nice, YOu've got a 3 spool vavle with it! |
Posted By: HudCo
Date Posted: 20 Mar 2025 at 10:09am
| the three spool valve came from a parts tractor last fall along with the air cleaner that was missing from mine . was scrapped along with every thing esle from the deck up what does that tube on the pump do it just goes up and points in to the belt pully side and is just a open tube |
Posted By: DrAllis
Date Posted: 20 Mar 2025 at 12:20pm
| Provides oil for the front clutch shaft bearing and belt pulley gears especially when the nose is up. |
Posted By: Mikez
Date Posted: 22 Mar 2025 at 9:12am
| We just did a bin with a bunch of gaskets if you need any. |